24×36 Modern Pavilion House Plans | 2 Bed, 1 Bath, 864 Sq Ft
$99
- 864sq ft
- 2bed
- 1bath
- 1story
- 13sheets
A 24 by 36 single storey pavilion under a low single slope roof with a deep cedar lined overhang, a clerestory window band above the doors and a raised deck on a stone faced base. Two bedrooms, a full bath, a laundry room and an open kitchen and living space. $99 instant download: 13 sheet PDF plan set plus material list.
- 13 print ready sheets
- Fully dimensioned floor plan
- All four elevations and section
- Electrical, plumbing and HVAC
- Material list included
- Unlimited prints for one build
Best for building it as drawn
Need editable CAD files or a change to the design? Request it here and we will quote it.
- Instant PDF download after checkout
- Roof overhang and shade depths dimensioned on the plan
- All 13 sheets, including electrical, plumbing and HVAC
- Material list included with every download
- Questions? We reply within 1 business day
Description
The 24×36 Modern Pavilion House is an 864 sq ft, 2 bedroom, 1 bathroom single level plan with a low single slope roof, a deep cedar lined overhang, a clerestory window band above the sliding doors and a raised deck on a stone faced base. You get a 13 sheet print ready PDF with the fully dimensioned floor plan, all four elevations, building section, roof and foundation sheets, electrical, plumbing and HVAC, plus a material list, delivered the moment you check out.
- The overhang does the work: it shades the glass in summer and keeps rain off the deck without a separate porch roof.
- A clerestory band above the doors lights the back of the plan, so the middle of the house is never dim.
- The deck sits on a stone faced base, which handles a sloping site without a crawlspace.
- White rendered walls with a cedar soffit, a palette that reads suburban rather than cabin.
- A separate laundry room rather than a hallway closet.
- Electrical, plumbing and HVAC sheets are in the set, not sold as extras.
Quick specs
- Plan number
- THP-24×36-PV
- Overall footprint
- 24′-0″ × 36′-0″
- Heated area
- 864 sq ft on one level
- Bedrooms
- 2
- Bathrooms
- 1 full, walk in shower
- Laundry
- Separate room, 5′-0″ × 7′-0″
- Kitchen & living
- 26′-8″ × 11′-8″, open plan
- Foyer
- 10′-4″ × 4′-0″
- Width
- 36′-0″
- Depth
- 24′-0″
- Garage
- None
- Loft
- None, single level plan
- Ceiling height
- 8′-0″ low side to 12′-0″ high side
- Top of roof
- 12′-0″ above slab
- Roof style
- Low single slope with deep overhang
- Soffit
- Cedar lined, lit with downlights
- Glazing
- Sliding doors with clerestory band above
- Exterior finish
- White render, cedar soffit, stone faced deck base
- Decks & shades
- Front deck 8′-0″; shades 4′-0″ and 6′-0″ wide; rear shade 2′-0″
- Walls
- Insulated panel wall, rendered finish
- Foundation
- Monolithic thickened edge slab
- Suited for
- ADU, guest house, rental, small home
- Format
- PDF instant download
- Sheet count
- 13 sheets + material list
- Drawing scale
- 1:50
- Licence
- One build, unlimited prints
Room by room
All 13 sheets, nothing held back
What is and is not in the set
Included
- Floor plan, fully dimensioned
- All four elevations and a building section
- Two roof sections through the overhang
- Deck and shade widths dimensioned
- Foundation and roof framing
- Electrical, plumbing and HVAC layouts
- Preliminary material list
Not included
- Engineer or architect stamp
- Site specific structural or wind load calculations
- Render system and stone veneer specification
- Site plan, septic or utility design
- Editable CAD files, available on request
These come from a professional licensed in your state. The full PDF set is what they need to review and stamp.
Can I get a building permit with these plans?
In most US jurisdictions these drawings are exactly what your building department will review. What varies is the paperwork around them. Before you buy, call your department and ask four questions:
- Do you require an engineer’s stamp?
- Do you require structural or wind load calculations?
- Do you require a site plan showing setbacks?
- Do you require an energy compliance form?
A deep cantilevered overhang is the detail a reviewer in a high wind county will look at twice, so ask about uplift while you have them on the phone. Because you receive the complete PDF set, a local engineer can review and stamp it without redrawing the project.
What will it cost to build?
Contractor built, 864 sq ft at roughly $118 to $256 per square foot.
The render system and the stone veneer sit above plain siding on the materials line.
You hire out the slab, framing, roof and glazing and finish the inside yourself.
The deck base is the one part worth leaving to a mason.
Figures are planning ranges, not quotes. Costs move with your region, site access and the exterior finishes you choose.
Who this plan is for
A suburban lot
White render and a flat roof line read as a small modern house rather than a cabin, which matters where neighbours and design rules do.
An ADU or rental
864 sq ft on one level with two equal bedrooms is the shape most ADU ordinances were written around.
Single level living
No loft and no stairs, with a wide covered deck as the second living room.
Owner-builders
A simple rectangle and a single slope roof, with the render and masonry hired out.
Need it changed?
Mirrored, widened, siding instead of render, the deck base changed, a crawlspace or pier foundation, or editable CAD files: tell us what you want and we will quote it, usually within one business day.
What you are buying
Your licence
One purchase lets you build this design once, on one lot. You can print the set as many times as you need for that build. You may not resell, share or redistribute the files.
Delivery
The download link appears on screen and is emailed the moment payment clears. It does not expire. Find a drawing error and we correct the sheet and resend it free.
Questions buyers ask
Does this plan have a loft?
No. It is a single level plan, 864 square feet with everything on the ground floor. The ceiling still rises from 8 feet on the low side to 12 feet on the high side, so the living space does not feel flat.
What is the clerestory band for?
It is the row of windows above the sliding doors. It brings daylight deep into the plan and lets you keep wall space below for furniture, which a taller window would not.
How big is it and how many rooms?
24 feet by 36 feet, 864 square feet on one level. Two bedrooms, one full bath, a separate laundry room and an open kitchen and living area.
Can I get a building permit with these plans?
In most US jurisdictions these drawings are what the building department reviews. Some counties also want an engineer stamp, structural calculations, a site plan or an energy form. You receive the complete set, so a local engineer can review and stamp it without redrawing anything.
Does the plan come with a material list?
Yes. A preliminary material list is included, prepared from the same 13 sheet drawing set.
What foundation does it use?
A monolithic thickened edge slab on grade, with the deck raised on a stone faced base. If you need a crawlspace or piers, we can redraw the structural sheets.
Does it include electrical, plumbing and HVAC?
Yes. The door schedule and electrical plan and the plumbing layout are part of the 13 sheet set.
Can I use siding instead of render?
Yes, and it is a common change. The wall build up stays the same; only the finish layer differs. Tell us what you want and we will mark the elevations.
Can I build it more than once?
One purchase covers one structure. Write to us for a multi build licence if you plan to repeat it.
How do I get the files?
The download link appears on screen the moment payment clears and is emailed to you as well. It does not expire.
Want the same footprint with a sleeping loft? Compare it with our Light Wood Lean Cabin plan, or see every design in the cabin plans collection.
Reviews
There are no reviews yet.